EasyManua.ls Logo

Energer ENB542BDS - Page 32

Energer ENB542BDS
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Repair
> This product does not contain any parts that can be repaired by the consumer.
Contact a qualified specialist to have it checked and repaired.
Storage
> Clean the product as described previous.
> Store the product and its accessories in a dry, frost-free place.
> Always store the product in place that is inaccessible to children. The ideal storage
temperature is between 10 and 30°C.
Fig. 32
Warning: Never connect live or netutral wires to the earth terminal
of the plug. Only fit an approved 5 Amp BS1363/A plug and the
correct rated fuse.
NOTE: If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed cable, it must
be destroyed to prevent engaging into a socket.
If the supply cord is damaged it must be replaced by a service
agent or a similarly qualified person in order to avoid hazard.
Green/Yellow
5AMP fuse
approved to
BS1362
Brown
(live)
L
Cable grip
Blue
(neutral)
N
Outer sleeve
5 AMP
The wire which is coloured blue must be connected to the terminal which is marked
with N. The wire, which is coloured brown, must be connected to the terminal, which
is marked with the letter L.
Care and maintenance
ENB542BDS by ENERGER
32
In more detail…
GB
IE