What to do if the relief valve on my Energie ECO 250esm is producing popping noises or draining?
If the relief valve on your Energie Water Heater is making popping noises or draining, it's likely due to pressure buildup from thermal expansion in a closed system. This situation needs correction. Contact your water supplier or a plumbing contractor for service. Do not plug the relief valve outlet.
Why is the water from my Energie ECO 250esm Water Heater too hot?
If the water from your Energie Water Heater is too hot, the water temperature might be set too high. See the section on setting the water temperature to adjust it to a more comfortable level.
How to fix water dripping down the outside of my Energie Water Heater?
If you notice water dripping down the outside of your Energie Water Heater, it's likely that the inlet or outlet water connections aren't tightened properly. Tighten the inlet and outlet pipe connections to resolve this issue.
General| Type | Electric Storage Water Heater |
|---|---|
| Capacity | 250 Liters |
| Voltage | 230V |
| Frequency | 50 Hz |
| Thermostat | Adjustable |
| Safety Features | Pressure Relief Valve |
| Insulation | Polyurethane Foam |
| Warranty | 2 years |
| Mounting | Wall-mounted |
Description of the safety group's function in protecting the system from anomalies.
Guidance on optimal panel location, inclination, and mounting methods for solar radiation capture.
Instructions for installing the hot water cylinder in a suitable location with necessary nearby connections.
Procedure for installing the thermodynamic block, ensuring proper connection and sealing.
Detailed steps for making refrigerant and hydraulic connections between system components.
Procedure for nitrogen loading and leak testing to ensure system integrity.
Steps for commissioning the system, filling the cylinder, and initial power-up.
To Next Page
