To Next Page
Y
yolanda81Nov 2, 2025
What to do if my Energie Inverter has low water temperature?
- Bbrandy98Nov 2, 2025
If your Energie Inverter's water temperature is low, several factors could be the cause. First, ensure the equipment is switched ON by pressing the ON/OFF key. Check the electrical connections, wiring, and circuit breaker. If these are fine, the electronic board may have an error; consult the error table. Other causes include using a large amount of hot water (try 'BOOST' mode), a low temperature setpoint (adjust it), ECO mode in low outside temperatures (switch to 'AUTO' or 'BOOST'), the electrical heater being off (ensure it has power), or the compressor being off (switch it on with the 'COMP' key). Also, check for hot water returning into the cold water circuit due to a faulty safety device. To resolve this, shut off the cold water supply, open a hot water tap, wait 10 minutes; if hot w...
General
