Do you have a question about the ENERGY SISTEM Office 2+ and is the answer not in the manual?
This document outlines the features, usage, and maintenance of the Headset Office 2+, a versatile audio device designed for both computer and smartphone use, suitable for video calls, music listening, and general audio communication.
The Headset Office 2+ is an on-ear headset equipped with a flexible and adjustable microphone, making it ideal for various communication needs. It offers multiple connection options, ensuring compatibility with a wide range of devices. The headset is designed for comfort during extended use, featuring an adjustable headband and high-density foam ear pads.
The headset is designed for flexible wear. For video calls, the microphone can be positioned on either the right or left side of the mouth, depending on user preference. When making video calls, the audio will be in mono sound. For music listening, the headset provides stereo sound, and it is recommended to observe the inner "Right" and "Left" markings on the ear cups for proper orientation.
The microphone can be adjusted to either side of the mouth. A symbol on the microphone indicates the optimal side for voice capture, ensuring clear communication. To reduce "popping" sounds caused by air expelled from the mouth during speech, a pop filter is included. This filter is particularly useful if the microphone is positioned less than 5 cm from the lips.
The Headset Office 2+ offers two primary methods for computer connection:
Using the USB Port: The headset comes with a USB adapter. To connect, simply plug the USB plug into an available USB port on your computer. The necessary drivers will install automatically, and the computer should detect the device within a few seconds. A computer restart is recommended after initial connection to ensure all drivers are correctly installed. Once connected via USB, the adapter provides integrated controls for volume adjustment and muting.
Using the 3.5 mm Mini Jack Plug: If your computer has a single audio connection port that supports both audio input and output (often marked with a headset symbol), you can connect the headset directly using its 3.5 mm mini-jack plug.
The Headset Office 2+ can also be connected to a smartphone using the 3.5 mm mini-jack plug. This allows for making video calls and listening to music directly from your mobile device. If your smartphone lacks a 3.5 mm mini-jack connection, you can typically use a Type-C adapter, which is often provided with such smartphones.
To ensure the longevity and optimal performance of your Headset Office 2+, follow these care and maintenance guidelines:
By adhering to these usage and maintenance instructions, you can maximize your experience with the Headset Office 2+ and ensure its reliable operation for various communication and entertainment needs.
| Connectivity | Wired |
|---|---|
| Microphone | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Cable Length | 1.8 m |
| Plug | 3.5 mm |
| Driver Unit | 40 mm |
| Microphone Frequency | 100 Hz - 10 kHz |
Loading...