What to do if the wall thermostat won't shut off my EnergyLogic Furnace?
- AAshley MeyerAug 7, 2025
If the wall thermostat does not shut the burner off, check the Wall T-Stat.
What to do if the wall thermostat won't shut off my EnergyLogic Furnace?
If the wall thermostat does not shut the burner off, check the Wall T-Stat.
What to do if the burner stops and the red button needs reset on my EnergyLogic Furnace?
If the burner runs briefly and the red button requires reset, check the Burner Motor.
Lists critical safety precautions and warnings for furnace installation and operation.
Details specific risks like electrical, fuel, and combustion gas hazards.
Outlines national, state, and local codes for installation and operation compliance.
Specifies approved fuels and guidelines for safe fuel handling and storage.
Defines minimum safe distances required between the furnace and combustible materials.
Guides for mounting the furnace cabinet onto a tank or to a wall/ceiling structure.
Essential advice and precautions for safe and effective furnace operation.
Details furnace safety features and operational warnings.
Step-by-step guide for initial start-up, including fuel priming.
Critical safety precautions, including lockout/tagout, for maintenance.
Detailed instructions for performing essential maintenance tasks including cleaning, replacement, and adjustments.
Detailed steps for testing individual furnace components and systems.
| Model | EL-200H |
|---|---|
| Heating Capacity | 200, 000 BTU/hr |
| Type | Waste Oil Furnace |
| Fuel Type | Waste Oil |
| Electrical | 120V, 60Hz |