To Next Page
C
charles60Aug 7, 2025
What to do if the wall thermostat won't shut off my EnergyLogic Furnace?
- WWilliam HillAug 7, 2025
If the wall thermostat does not shut the burner off, check the Wall T-Stat.
What to do if the wall thermostat won't shut off my EnergyLogic Furnace?
If the wall thermostat does not shut the burner off, check the Wall T-Stat.
What to do if the burner stops and the red button needs reset on my EnergyLogic Furnace?
If the burner runs briefly and the red button requires reset, check the Burner Motor.
Covers approved fuels, fuel handling, and management practices for safe operation.
Instructions for making the main electrical power connection to the furnace.
Covers the initial startup procedures, including fuel system priming.
Detailed steps on how to prime the metering pump and fuel system.
Instructions for initiating the furnace startup sequence after priming.
Procedures for checking and adjusting the burner system after startup.
Critical safety warnings related to electrical lockout/tagout procedures during maintenance.
General introduction to the maintenance procedures section.
Detailed steps for cleaning the heat exchanger to ensure efficient operation.
Instructions for cleaning the blower wheel to maintain performance.
Guidance on how and when to replace the fuel oil filter.
Procedure for cleaning the preheater assembly annually.
Steps for cleaning the nozzle line assembly to prevent blockages.
Information on adjusting retention head and electrode settings for optimal combustion.
Initial steps to take when experiencing problems with the furnace.
Detailed instructions for testing various components to diagnose faults.
General| Brand | EnergyLogic |
|---|---|
| Model | EL-350H |
| Category | Furnace |
| Language | English |
