Enerlites MPC-50V - User Manual

Figure 1
Testing & Code Compliance
 UL LISTE D
Motor..............................................................................1/4 HP ,120VAC, 60HZ
Incandescent....................................................................800W-120VAC, 60HZ
Operating Temperature ...................................................32°to 131°F (0°to 55°C)
Adjustable Light Level ................................................................10FC—150FC
Adjustable Time Delay ................................................................15 sec.-30min
Sensitivity Adjustment.........................................50% or 100% (DIP switch 1)
Coverage……………………...................……………………………Up to 1200 ft
2
Fluorescent ...................................800VA-120VAC / 1600VA-277VAC, 60HZ
Resistive ..........................................................................800W-120VAC, 60HZ
The MPC-50V provides a 360° coverage pattern, up to 1200 square feet. The
coverage shown represents walking motion at a mounting height of 8 feet(See
Figure 1 ).For building spaces with lower levels of activity or with obstacles
and barriers, coverage size may decrease.
44 ft
13.4m
8 ft
22 ft 22 ft13 ft 13 ft7 ft 7 ft3 ft 0 3 ft
Typical
desk-top
level
Coverage Pattern
Description: The MPC-50V 360 °passive infrared (PIR) occupancy sensors turn lighting systems
on and off based on occupancy and ambient light levels. The light level feature keeps lights from
turning on if the ambient light level is sufficient. The sensors can be configured to turn lighting on,
and hold it on as long as the sensor detects occupancy. After no movement is detected for a
specified time the lights are switched off.
360° Passive Infrared
L
ine Voltage Occupancy Sensor
Model #: MPC-50V
General
Specification
 Passive Infrared
Technology(PIR)
 360 ° field of view, 1200sqft
 Time Delay is adjustable
from 5 seconds to 30
minutes
 Simple, fast installation
 Adjustable sensitivity
settings
 Light level is adjustable.
Specifications
Features

Summary

General Specification

Product Description

The MPC-50V 360° passive infrared (PIR) occupancy sensors turn lighting systems on and off based on occupancy and ambient light levels.

Coverage Pattern

Details the 360° coverage pattern up to 1200 sqft and factors affecting coverage size.

Testing & Code Compliance

UL Listed

Confirms the product is listed by Underwriters Laboratories, ensuring safety and compliance.

Wiring Directions

Wire Connection Steps

Connects main power Hot, Load, and Neutral wires to the sensor's Black, Red, and White wires respectively.

Mounting

Octagonal Junction Box Mounting

Provides step-by-step instructions for mounting the sensor using an octagonal junction box.

Sensor Adjustment

Adjustment Controls

Identifies Time Delay, PIR Activity LED, Light Level Adjustment, and DIP switches on the sensor.

Sensor Test Procedure

Guides through testing PIR activity, time delay, and light level settings for proper operation.

DIP Switch Setting

Sensitivity Setting (DIP Switch 1)

Configures sensor coverage range to 50% or 100% (1200 sqft).

Vacancy Mode (DIP Switch 2)

Enables manual-on function with a momentary switch, affecting automatic ON/OFF behavior.

Enerlites MPC-50V Specifications

General

Brand	Enerlites
Model	MPC-50V
Category	Accessories
Language	English