To Next PageTo Next Page
Need help?Do you have a question about the ENERMAX REVOLUTION85PLUS and is the answer not in the manual?
General| Dimensions | 150mm(W) x 86mm(H) x 160mm(D) |
|---|---|
| Over Voltage Protection | Yes |
| Over Power Protection | Yes |
| Short Circuit Protection | Yes |
| Floppy Connectors | 1 |
| Over Temperature Protection | Yes |
| Under Voltage Protection | Yes |
| No Load Operation | Yes |
| MTBF | 100, 000 hours |
| Modular | Fully Modular |
| Cooling | Fan |
| Input Voltage | 100-240V |
| +12V Rails | Single |
| Type | ATX |
| Fan Size | 135mm |
| Molex 4-pin Connectors | 4 |
| Operating Temperature | 0°C to 50°C |
Details ENERMAX's non-liability for damages and the product's warranty terms.
Lists AC input voltage/current and detailed DC output voltage/current ratings for each model.
Details protection circuits, operating environment conditions, cooling, MTBF, dimensions, weight, safety, and EMC.
Provides advice on system placement to avoid heat, magnetic fields, moisture, and dust for better performance.
Guides users on selecting an appropriate UPS capacity and understanding VA vs. Watt ratings.
Identifies key PSU components and explains the HeatGuard function for extended system life.
Details the installation of the CordGuard for secure cable connections and general cable handling advice.
Describes connectors for motherboards, CPUs (4+4P, 8P), and PCI-E graphics cards (6+2P, 6P).
Lists connectors for SATA drives, Molex devices, and floppy drives (FDD).
Explains the function and connection of the Fan RPM Monitor (FM) connector.
Lists and describes the included modular cables (e.g., Molex, SATA, PCI-E, CPU/RAM).
Provides step-by-step instructions for connecting and disconnecting modular cables from the PSU.
Outlines essential checks before powering on the system for the first time.
Explains the meaning of PowerGuard LED colors and corresponding troubleshooting steps for abnormal conditions.
