To Next PageTo Next Page
Need help?Do you have a question about the EnerSys IMPAQ EI1 Series and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Charging Stages | 3-stage (Bulk, Absorption, Float) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Output Voltage | 12/24 VDC |
| Protection Features | Over Voltage, Short Circuit, Over Temperature |
| Operating Temperature | -20°C to 50°C |
Ensure shipping pallet is removed for safe operation.
Avoid touching non-insulated parts and terminals to prevent shock.
Batteries produce explosive hydrogen gas; avoid ignition sources.
Crucial warning about removing the shipping pallet before installation.
Guidance on location selection and cabinet mounting methods.
Steps for connecting input power and grounding the charger safely.
Caution regarding fire risk and proper circuit protection use.
Guide for selecting appropriate breaker/fuse sizes based on AC amps.
Charger idle display, starting cycles, and delayed start functions.
Details displayed during the effective charging phase.
Specific parameters shown during charging, like profile, current, voltage, time, and percentage.
Procedures for manually initiating an equalization charge.
Comprehensive list of fault codes, their causes, and recommended solutions.
Warnings regarding dangerous voltages and requirements for qualified personnel.
Guidelines for cleaning connections, terminals, and heatsink, and contacting service.
