To Next PageTo Next Page
Need help?Do you have a question about the EnerSys IMPAQ EI3-IN-4G and is the answer not in the manual?
General| Input Voltage | 100-240 V AC |
|---|---|
| Input Frequency | 50/60 Hz |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Charging Technology | Multi-stage charging (Bulk, Absorption, Float) |
| Compatible Battery Types | AGM, Gel |
| Protection Features | Reverse polarity, over-temperature, short circuit, over-voltage |
| Certifications | CE |
| Communication | CAN Bus |
Identifies charger model and part number for configuration and correspondence.
Steps for making correct AC/DC connections, grounding, and AC circuit protection.
Describes automatic battery recognition and available charging profiles for different battery types.
Lists fault codes, their causes, and recommended solutions for charger issues.
Covers additional fault codes like MOD DFC, DEF ID, and issues with charger modules.
Provides guidance on basic maintenance and how to contact EnerSys for service.
Lists technical specifications for 1 kW IMPAQ chargers, including voltage, amps, kW, and cables.
Continues technical specifications for 1 kW IMPAQ chargers with various configurations.
Specifies 3.5 kW chargers for 208/220/240V input, covering various configurations.
