To Next PageTo Next Page
Need help?Do you have a question about the EnerSys IMPAQ EI3-HL-4Y and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Battery Type | Lead Acid |
| Category | Battery Charger |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Protection Features | Over Voltage, Short Circuit, Reverse Polarity |
Explains UL Model and Part Numbers for charger configuration and correspondence.
Specifies optimal placement criteria for safe and effective charger operation.
Details requirements and methods for securely mounting the charger unit.
Provides instructions for safe and correct connection of AC power supply.
Outlines the process for connecting input power to charger terminals with torque specifications.
Explains the procedure for grounding the charger to prevent electrical hazards.
Explains the microprocessor-controlled nature and battery compatibility of IMPAQ exttrademark exttrademark chargers.
Details how the charger initiates a battery charging cycle upon connection.
Describes how charging current is determined and adjusts based on battery voltage and state.
Outlines requirements and procedures for charging multiple batteries in series.
Balances electrolyte densities in battery cells after normal charging.
Maintains battery at maximum charge while connected to the charger.
Displays charger operation information and menus.
Selects menu items, enters values, or stops/restarts charging.
Enters main menu, scrolls left, or exits menus.
The central access point for all charger menus and functions.
Allows updating the charger's internal software provided by EnerSys.
