EnerSys IMPAQ EI3-IN-5Y User Manual

IMPAQ™
Owner’s Manual
AM-IMPAQ-OM
Rev AB October 2018
21
MOD DFC
Yes
Alternating with charge
parameters – one or more
module in DF1 fault – the
charge process continues –
the fault module(s) is(are)
displayed + red led flashing.
Check power modules. If all modules
in DF1 fault a DF1 error will follow.
DEF ID
Yes
Blocking fault – one or more
modules are not compatible
with the charger
configuration (for example
24V charger with one 48V
module). This can happen if
the user replaces one
module with another one
with a different voltage
setting.
Use correct module(s).

EnerSys IMPAQ EI3-IN-5Y Specifications

General

Brand	EnerSys
Model	IMPAQ EI3-IN-5Y
Category	Battery Charger
Language	English