24
www.enersys.com
Electromagnet Maintenance (Figure – 6)
Slider Strip Maintenance
MJS 04/03/02
btmanualdrawings.dwg
DESIGNED:
TITLE:
CAD File:
The three (3) slider strips (Item 1) on the oor of the “BATTERY TUGGER” will require
regular maintenance to provide long and useful service (weekly).
Wipe the top of the slider strips to remove debris, grease, oil and any other foreign
material. This will reduce the friction and ensure a long service life with thousands
of safe operations.
If the slider strips are heavily worn, replace them. To do this remove front slider
stop (item 2) and slide the plastic Slider Strip out. Slide the new Slider Strip into the
Slider Strip Channel and replace front slider stop (item 2).
BATTERY HANDLING EQUIPMENT
To Next Page
Loading...