ENFORCER E-931-S50RRGQ - User Manual

E-931-S50RRGQ
50ft Reflective Photoelectric Beam Sensor
Manual
 Up to 50ft (15m) sensing range
 Weatherproof (IP55)
 Anti-condensation housing
 12-30V DC/AC 60Hz, 100mA
 Form C relay: 0.5A@30VAC/VDC
 Beam status LED
 N.C. Tamper switch:
500mA@30VAC/VDC
Caution:
 This sensor is not designed to prevent bodily injury or loss of life.
 This sensor is not designed for use in environments where explosive gasses may be present.
 Use of this sensor in certain security applications may be regulated by local laws or codes. SECO-LARM is not
responsible for compliance with such laws or codes.

Summary

Specifications and Parts

Product Specifications

Details key technical specifications of the beam sensor, including model, range, voltage, current, and IP rating.

Parts List

Lists all components included with the sensor package, such as the sensor, reflector, mounting bracket, and manual.

Installation and Setup

Mounting Instructions

Step-by-step guide for physically mounting the sensor unit and its components securely.

Wiring Procedures

Detailed instructions for connecting the sensor to power and alarm systems via cable breakout.

Beam Alignment

Guidance on adjusting the sensor and reflector for optimal beam signal and proper alignment.

Operational Information

Sample Applications

Illustrates common use cases for the photoelectric beam sensor, such as gates and vehicle detection.

Troubleshooting Guide

Provides solutions for common issues like the sensor not detecting objects or LEDs not turning green.

ENFORCER E-931-S50RRGQ Specifications

General

Brand	ENFORCER
Model	E-931-S50RRGQ
Category	Accessories
Language	English