ENFORCER No Touch SD-927PKC-NEQ User Manual

SD-927PWCQ
(English / Español / Francais)
SD-927PKC-NEQ (English)
SD-927PKC-NSQ (Español)
SD-927PKC-NFQ (Francais)
Features:
• Range up to 4” (10cm). Range for
SD-927PWCQ is up to 2” (5cm).
• Stainless steel or white plastic
single-gang plate.
• 3A relay, triggers minimum 0.5 sec or as
long as hand is near the sensor.
The ENFORCER No Touch Request-To-Exit Sensor uses IR technology to request egress from a protected
area or activate a device with the simple wave of a hand. Since it is No Touch, this sensor is ideal for use
in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
Note: Products with model number that ends with "Q" or which have a round green “Q” sticker represent RoHS compliant products.
,
• LED illuminated sensor area for
easy identification.
• Quick connect screwless terminal block.
• Selectable LED colors (turns from red
to green or green to red) to show
sensor activated.
,
ENFORCER
No Touch
Request-To-Exit Sensor
Manual

ENFORCER No Touch SD-927PKC-NEQ Specifications

General

Model	SD-927PKC-NEQ
Operating Voltage	12~24VDC
Operating Temperature	-4°~131°F (-20°~55°C)
Operating Humidity	0~95% non-condensing
Sensor Type	Infrared Sensor
Category	Accessories
Dimensions	4-3/4" x 2-3/4" x 1-1/2" (121 x 70 x 38 mm)
Relay Output	NO/NC/COM
Detection Range	Up to 4" (10cm)

Summary

Product Features

Range and Plate Material

Specifies the sensing range and available plate materials (stainless steel or white plastic).

Relay and Trigger

Details the 3A relay and its trigger behavior (minimum 0.5 sec or continuous).

LED Illumination and Connectivity

Highlights LED illumination for identification and quick connect screwless terminal blocks.

Selectable LED Colors

Describes selectable LED colors to indicate sensor activation status (red/green).

Installation Instructions

Basic Installation Steps

Outlines running wires, connecting to the terminal block, and mounting the plate.

LED Color Adjustment

Explains how to reverse LED color indicators (standby/triggered) using a jumper.

Decal Application for SD-927PWCQ

Details selecting, aligning, and applying decals for specific models.

Specifications

Model and Power

Lists supported models (SD-927PKC series, SD-927PWCQ) and power requirements (12VDC).

Relay and Response

Specifies relay type (Form-C), output rating (3A), and response time (10mS).

LEDs, Output Time, and Range

Details LED status, output duration, and sensing range for different models.

Environmental and Physical Specs

Covers operating temperature range, weight, and dimensions.

Example Installations

Electromagnetic Lock (Fail-Safe)

Illustrates wiring a sensor with an electromagnetic lock in a fail-safe configuration.

Electric Doorstrike (Fail-Secure)

Shows installation with an electric doorstrike in a fail-secure setup.

Electromagnetic Lock with Keypad

Depicts a setup combining the sensor, keypad, and electromagnetic lock.

Care, Cleaning, and Warranty

Cleaning Guidelines

Provides instructions for cleaning the sensor using soft cloths and mild cleaners.

Mounting Warnings

Warns against incorrect mounting leading to exposure to moisture, voiding warranty.

Product Warranty Information

Details the one-year warranty against defects and conditions for voiding the warranty.

Company Notices

Includes copyright, permission policy, and contact information for SECO-LARM.