ENFORCER E-931-S50RRQ - User Manual

E-931-S50RRQ
50ft Reflective Photoelectric Beam Sensor
Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
Manual
 Up to 50ft (15m) sensing range
 Weatherproof (IP66)
 Anti-condensation housing
 12~250 VAC/VDC
 Form C relay: 1A@30VDC
 Beam status LED
 N.C. Tamper switch:
500mA@30VDC
Caution:
 This sensor is not designed to prevent bodily injury or loss of life.
 This sensor is not designed for use in environments where explosive gasses may be present.
 Use of this sensor in certain security applications may be regulated by local laws or codes. SECO-LARM is not
responsible for compliance with such laws or codes.

ENFORCER E-931-S50RRQ Specifications

General

Brand	ENFORCER
Model	E-931-S50RRQ
Category	Accessories
Language	English