ENFORCER Wireless Entry Alert System
2 SECO-LARM U.S.A., Inc.
The ENFORCER Wireless Entry Alert System is a self-contained easy-to-install alert system for commercial or home
applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a
speaker installed up to 328ft (100m) away*. An additional speaker may be installed to alert more than one area on the
property and an optional solar charger may be installed with the sensor for even more convenience.
Chime/Off/Alarm (selectable)
3
1
/
4
”x2
9
/
16
”x1
1
/
2
”
(82x66x38 mm)
Additional Wireless
Speaker
E-931ACC-SFQ
Digital Counter
E-931ACC-CQ
Replacement
Square Reflector
E-931ACC-R2Q
Solar Charger
for Sensor
E-931ACC-SPQ
Hood for Square and
Round Reflectors
E-931ACC-HR1Q
3” Round
Reflector
E-931ACC-RC1Q
*Range may vary greatly depending on the installation and operating environment.
1x Speaker
1x Reflector
2x Power adapters
1x Small screwdriver
1x Sensor mounting bracket
2x Reflector/Speaker mounting bracket**
2x Bolts (Sensor)
2x Bolts (Reflector)
5x Mounting screws
1x Screw anchor
1x Manual
Cable length: 9
7
/
8
” (250mm)
**Reflector and Speaker use the same mounting bracket.