ENFORCER ST Series - User Manual

ST-Series
Power Supplies/Chargers
Manual
Features:
 Automatic recharging of backup batteries
 Automatic switchover to backup battery if
main power is lost or cut
 Built-in battery short-circuit protection
 LEDs indicate power status
 High efficiency at full load
 Heat sink free design (except for
ST-2406-7AQ and ST-2406-10AQ)
 Programmable DC voltage output
 Regulated and filtered output voltage
 Fused output for a regulated charge
 Includes foam tape and battery leads
for easy installation
 Low-battery cutoff (ST-2406-2AQ,
ST-2406-3AQ, and ST-2406-5AQ)
ST-2406-3AQ shown

ENFORCER ST Series Specifications

General

Input Voltage	100-240VAC
Output Current	10A
Charging Stages	3-stage
Compatibility	Lead-acid, AGM, Gel
Protection Features	Over-voltage, Short-circuit, Reverse polarity
Output Voltage	12VDC

Summary

Introduction to ENFORCER Power Supplies;Chargers

Product Overview

SECO-LARM's ST-series power supplies/chargers for alarm and access control systems.

Specifications and Components

Product Specifications Table

Details DC voltage, status LEDs, current ratings, fuse, and dimensions for ST-series models.

Wiring Diagram

Illustrates the wiring connections for the ST-2406-3AQ model, including AC input and DC output.

Installation and Operation Notes

Installation Steps

Guide on mounting the PC board and setting the DC output voltage using DIP switches.

LED Status Indicators

Explanation of LED indicators for normal operation, VAC input, and VDC output status.

Fuse Specifications

Details fuse ratings for different ST-series models to prevent damage.

Low Battery Cutoff Feature

Describes the automatic low battery cutoff function for specific ST-series models.

Troubleshooting and Support

Troubleshooting Common Issues

Guidance for resolving issues like no DC output, low DC voltage, and no backup battery power.

Product Warranty Information

Details the 1-year warranty against defects in material and workmanship.

Company Policy and Contact

Information on SECO-LARM's policy for product improvement and contact details.