Need help?Do you have a question about the EnGenius EDS5115 and is the answer not in the manual?
General| Model | EDS5115 |
|---|---|
| Video Compression | H.264, MJPEG |
| Audio Compression | G.711 |
| Ingress Protection | IP66 |
| Image Sensor | 1/2.7" CMOS |
| Frame Rate | Up to 30 fps |
| Minimum Illumination | 0 Lux with IR |
| Night Vision | Yes (IR LEDs) |
| Day/Night | ICR |
| Audio | Built-in microphone |
| Ethernet | 10/100 Mbps |
| Protocols | TCP/IP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, NTP, RTSP, RTP, UPnP |
| Security | Password protection, IP address filtering, HTTPS encryption |
| Local Storage | MicroSD card slot (up to 128GB) |
| Power Supply | 12V DC, PoE (802.3af) |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
Lists the main functionalities and specifications of the EDS5115 camera.
Instructions on how to physically set up the camera hardware.
Guidance on connecting the camera to a network.
Methods to access and manage the camera from a computer.
Configuring network settings for the camera using EnViewer Finder.
Configuring video stream settings like resolution and codec.
Accessing the camera via a web browser using IP address or DDNS.
Instructions for managing the camera using the EnViewer mobile app.
Creating new user accounts with different access privileges.
Configuring the camera's wireless network connection.
Adjusting settings for live video streaming and capturing.
Instructions for upgrading the camera's firmware.
Saving and restoring camera configuration settings.
How to reboot or reset the camera to factory default settings.
Setting up the camera's IP address mode (DHCP, Static, PPPoE).
Basic wireless settings including enabling/disabling and scanning for APs.
Setting up wireless connection using Wi-Fi Protected Setup.
Configuring video stream settings like compression and bit rate.
Configuring settings for event notifications and storage.
Setting up network storage for saving captured images and videos.
Configuring email alerts for events or alarms.
Managing event detection and recording settings.
Configuring detection methods and actions for events.
Setting up motion detection zones and sensitivity.
Configuring actions to be taken when an event is detected.
Setting up schedules for automatic video recording.
Managing user accounts and their access privileges.
To Next Page
