Quick Start Guide – ESR-9753 Wireless Broadband Router. 1
ESR-9753 Wireless Broadband Router
Quick Start Guide
CHECK
• A standard CD-ROM drive
• Internet connection should be setup & ready to use (ADSL or cable modem).
• Modem must provide RJ45 port to connect with ESR-9753.
• Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter
• CAT 5 network cable(s), RJ45 port on PC/Notebook.
• Internet Browser (Microsoft Internet Explorer, Firefox and Netscape navigator.)
STEP 1
Connect the power adapter supplied with the ESR-9753 to the power socket on the
back of this device. Check to see that the power LED on the front of the panel of the ESR-
9753 is turned ON.
STEP 2
Connect ESR-9753 LAN port & PC/Notebook RJ45 port with network cable.
STEP 3
Run the web browser on your computer. In the address field, type the default IP
address http://192.168.0.1.
The following login screen will appear. Enter admin for both Username and Password.
To Next Page
Need help?
General
