Need help?Do you have a question about the EnGenius ESR6650 and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz, 5 GHz |
|---|---|
| USB Ports | 1 x USB 3.0 |
| Wireless Standard | IEEE 802.11ac |
| Ethernet Ports | 5 (1 WAN, 4 LAN) |
| Antenna Type | 4 x External antennas |
| Security | WPA, WPA2 |
| Firewall | SPI firewall |
| VPN Support | PPTP, L2TP |
| Memory | 512 MB RAM |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Dimensions | 220 x 160 x 40 mm |
Outlines the necessary hardware and software prerequisites for installing the ESR6650.
Details the process of setting up LAN connections and WAN interfaces (3G, ADSL/Cable) for internet access.
Guides users through configuring the network adapter on a PC, specifically for Windows XP.
Explains how to power on the ESR6650 and its initial self-test sequence.
Guides users through choosing between AP Router and AP Repeater modes for the ESR6650.
Details the steps to access the ESR6650's web-based management interface via a browser.
Guides users through the step-by-step configuration of the router in AP Router mode.
Sets up the router's internet connection, supporting 3G, ADSL, and Cable modem types.
Configures essential wireless parameters like SSID, band, and channel for AP Router mode.
Implements security measures like WEP, WPA, and WPA2 to protect the wireless network.
Configures firewall rules including DoS, DMZ, URL/IP/MAC filtering, and VPN pass-through.
Guides users through the process of upgrading the router's firmware.
Details how to reset the router to factory defaults for troubleshooting or recovery.
Configures fundamental wireless parameters for the router when acting as a repeater.
To Next Page
