Quick Start Guide – ETR9350 Wireless Broadband Router. 1
ETR9350 3G Travel Router
Quick Start Guide
Connect the supplied power-adapter to the power inlet port and connect it
to a wall outlet. Then, the router automatically enters the self-test phase.
During self-test phase, Power LED will blink briefly, and then will be lit
continuously to indicate that this product is in normal operation.
Minimum Requirements
A standard CD-ROM drive
3G data card , ADSL or cable modem should be ready for Internet
connection.
Modem must provide RJ45 port to connect with ETR9350.
Microsoft Windows compatible PC/Notebook with UPnP enabled
network adapter
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Power up the device.
Wait for POWER led on front panel lights up & remains stable
.
STEP 2
Insert Wizard CD into your CD-ROM drive and browse it with
Windows Explorer.
Click on “Wizard.exe” to activate SMART WIZARD.
Please contact your local ISP for Internet access account
detail including Username (or account) and Password.
You may need to keep the information handy during the
setup process.
To Next Page
Need help?
General
