EnGenius M35 User Manual

Quick Start Guide
M35

EnGenius M35 Specifications

General

Frequency Bands	2.4 GHz, 5 GHz
Antenna Type	Internal
Maximum Wireless Speed	300 Mbps (2.4 GHz)
Security Protocols	WPA, WPA2
VPN Support	Yes, PPTP, L2TP
Power Supply	12V
Operating Modes	Access Point

Summary

IP Address Configuration

Configure TCP/IP Settings

Set PC IP address and subnet mask to match the device's subnet for access.

Logging In to the Device

Access Web Interface

Enter the device's default IP address into the web browser's address bar.

Enter Login Credentials

Use 'admin' for username and password, then click Login.

Administration Settings

Access Management Section

Click the Administration link to access user name and password modification options.

System Properties Configuration

Set Device Properties

Configure device name, country, and select operation mode (AP, Bridge, Router, etc.).

IP Settings Configuration

Configure LAN Interface

Set static IP, subnet mask, default gateway, and DNS for the LAN interface.

DHCP or Static IP Assignment

Choose automatic IP assignment (DHCP) or specify a static IP address.

Wireless Network and Security

Configure Wireless Mode and Channel

Select wireless mode (B, G, SuperG) and channel based on regulations.

Set Wireless Network Name (SSID)

Define the unique SSID for the wireless network, maximum 32 characters.

Configure Wireless Security

Set security features like WEP, WPA/WPA2, or hide the SSID.

Station Separator Function

Enable Layer 2 isolation to prevent direct communication between connected clients.