M35
Multi-Function MESH AP
• 2.4GHz
• 108Mbps
• 802.11b/g/Super G
• 7+1 Modes
Learn more about EnGenius Solutions at www.engeniustech.com.sg
BUSINESS CLASS
M35
M35 Datasheet Version 111110
*Theoretical wireless signal rate based on IEEE standard of 802.11 a, b, g, n chipset used. Actual throughput may vary.Network conditions and environmental
factors lower actual throughput rate.
** All specifications are subject to change without notice
PRODUCT DESCRIPTION
M35 is a powerful, enhanced, enterprise level product supports 7 multi-functions to
operate for every kind of working environment.
It supports high transmit output power and high data rate which plays different roles
of Access Point/ Client Bridge / Repeater / WDS AP / WDS Bridge / Client Router /
AP Router / Mesh. It operates seamlessly in the 2.4 GHz frequency spectrum
supporting the 802.11b (2.4GHz, 11Mbps) and super high sped of 802.11g (2.4GHz,
108Mbps) wireless standards. It supports different output power level settings,
bandwidth selection, and RSSI indicator which enables the best transmitting and
receiving signal for traffic communication. Based on mesh function, it can be used to
establish mesh network, reduces the expense of equipment and risk of disconnection.
For more sensitive security requirements, M35 can encrypt all wireless transmissions
through WEP data encryption and WPA/WPA2.
M35 also supports IEEE 802.1x Supplicant function in CB mode, and authenticator in
AP mode. Those are the enhanced securities in AP/CB mode. The MAC address filter
lets you select any stations should have access to your network. The User isolation
function could protect the private network between client users. Normally, M35 has
mighty security function for your network safety.
To Next Page
Need help?
General
