Need help?Do you have a question about the EnGenius ECB9500 and is the answer not in the manual?
General| Frequency band | 2.4 - 2.484 GHz |
|---|---|
| Maximum data transfer rate | 1000 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Antenna type | External |
| Antennas quantity | 3 |
| Antenna connector type | TNC |
| Antenna gain level (max) | 5 dBi |
| Media access protocol | CSMA/CA |
| Ethernet LAN (RJ-45) ports | 1 |
| Compliance industry standards | FCC Part 15/UL, ETSI 300/328/CE |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Weight | 350 g |
|---|---|
| Dimensions (WxDxH) | 108 x 125 x 31 mm |
Lists the features and benefits of the wireless client bridge, including speed, Ethernet compatibility, and multi-functionality.
Explains the simplest network setup where devices connect directly without an access point.
Details the network setup requiring an access point for all wireless communication.
Step-by-step instructions for physically connecting and setting up the device hardware.
Guide to configuring the device's IP address and PC settings for initial access.
Instructions on how to access the device's web interface using its IP address and login credentials.
Displays current system settings, operating mode, uptime, and version information.
Shows current wireless settings like SSID, Channel, Security, and BSSID for the Access Point mode.
Configures basic wireless settings such as SSID, Channel, Security, and BSSID in Access Point mode.
Sets up wireless security, allowing configuration of WEP, WPA, and 802.1x authentication.
Configures Virtual LANs to segment network traffic and manage communication.
Shows current wireless settings like SSID, Channel, Security, and BSSID for the Client Bridge mode.
Configures basic wireless settings such as SSID, Channel, Security, and BSSID in Client Bridge mode.
Manages AP profiles by adding, editing, or deleting SSIDs and encryption settings.
Displays current wireless settings like SSID, Channel, Security, and BSSID for the WDS Bridge mode.
Configures basic wireless settings such as SSID, Channel, Security, and BSSID in WDS Bridge mode.
Shows current wireless settings like SSID, Channel, Security, and BSSID for the Repeater mode.
Sets up wireless security, allowing configuration of WEP, WPA, and 802.1x authentication in Repeater mode.
Configures Wi-Fi Protected Setup for easy and secure connection of wireless devices in Repeater mode.
Manages Quality of Service (QoS) for prioritizing voice and video traffic in Repeater mode.
Configures static/dynamic IP addresses and DHCP server settings for the local network.
Allows changing the device login password for enhanced security.
Instructions on how to upgrade the device's firmware to improve functionality and performance.
Restores previously saved system configuration settings from a file.
Allows network diagnosis by pinging IP addresses to check connectivity.
Provides a summary of the device's physical interfaces, status indicators, and power requirements.
Details the radio frequency band, protocols, modulation, channels, and sensitivity.
States compliance with FCC rules and provides measures to correct interference.
Outlines compliance with Industry Canada rules and radiation exposure information.
To Next Page
