EnGenius ECB9500 - Client Bridge Operating Mode; Status; Basic

Multi-Function Gigabit Wireless-N Client Bridge Version 2.0
30
3.2.4.3 Client Bridge Operating
Mode
 In order to configure the device as an Access
Point, select Client Bridge from the Operating
Mode drop-down list.
 A dialog box will appear to notify you that the
system will restart in order for the change to
take effect. Click on the OK button to continue.
 Please wait while the device counts down and
restarts into the new operating mode.
 Once the device has restarted into Client
Bridge mode, you will see a new drop-down
menu with fice options which are: Status,
Basic, Advanced, AP Profile, and WMM. Each
of the options is described in detail below.
3.2.4.3.1 Status
 Click on the Status link under the Wireless drop-down menu. This page will display
the current wireless settings such as SSID, Channel, Security and BSSID (MAC
address)
3.2.4.3.2 Basic
 Click on the Basic link under the Wireless drop-down menu. This page will display
the current wireless settings such as SSID, Channel, Security and BSSID (MAC
address).