Need help?Do you have a question about the Engl Tube Preamp 530 and is the answer not in the manual?
General| Type | Tube Preamp |
|---|---|
| Model | 530 |
| Channels | 2 |
| Footswitchable | Yes |
| Inputs | Input |
| FX Loop | Serial FX Loop |
| Tube Configuration | 12AX7 |
| EQ | 3-Band EQ |
Controls input sensitivity for the Clean channel.
Controls distortion level for the Lead channel.
Increases gain for both channels, modifying Clean/Lead sounds.
Pushbutton to switch between Clean and Lead channels.
Stereo jacks for connecting footswitches/MIDI for channel, gain, and contour control.
Left/Right outputs providing a frequency-compensated signal for recording.
Left/Right outputs for routing to poweramps or FX devices.
Stereo inputs for connecting external signal processors.
Specifications for input and output signal levels.
Protect from knocks, allow cooling, avoid damp/dusty rooms.
Warnings on tube replacement, professional repair, ungrounded outlets, fuses, chassis opening, and humidity.
To Next Page