Englefield VALENCIA SERIES User Manual

Page 11090694-A02-B 09/05/2012 Kohler Co.
INSTALLATION GUIDE
VALENCIA & PROFESSIONAL SERIES
SHOWER DOOR HANDLE
Unpack handle, and check if any components are missing.
Handle rail ( x1)
Stando ( x2)
Washer PVC 12.5 mm (x4)
Washer flat (x4)
Washer PVC 21 mm (x4)
Door knob (x2)
Remove handle knob and washers of both grub screws as
shown picture on the right.
From the outside of the door, position the handle through
the holes in the glass.
Ensure the hole in the glass is well covered by the PVC and
the flat washers.
Stando
Washer
PVC
Grub
screw
Door
knob
Washer
Flat
Washer
PVC
Handle
rail
Flat &
21 PVC Washer
Edge
Glass hole
Edge
Grub
screw

Englefield VALENCIA SERIES Specifications

General

Brand	Englefield
Model	VALENCIA SERIES
Category	Kitchen & Bath Fixtures
Language	English

Summary

Shower Door Handle Installation

Component Check and Preparation

Unpack the handle and verify all listed components are present before starting installation.

Handle Placement and Securing

Position the handle through the glass holes, ensuring washers cover the glass edges.

Final Assembly and Tightening

Slide specified washers onto grub screws and fit door knobs to secure the handle.

Cleaning Instructions