Battery charging:
First,connect the DC end of the charger
tothe battery charging port,then plug
the ACend of thecharger into the AC wall
outlet.At this point,thecharger indicator
light will be red,indicating that the charging
has started.Wait until the charger indicator
light turnsgreen,signaling that the battery
charging is complete.First,unplug the AC
end and then the DC end of thecharger in
order.
Remove the battery:
While the bike is folded,rotate the key
clockwise fully to disengage the lock
core from its position.Now,slide the
battery outto removeit.
Install the battery:
While bike is folded,insert battery into
frame.Ensure correct orientation.Turn
the key clockwise to the right;the first
turn locks the battery box,and the
second turn powers on the E-bike.
To Next Page
Loading...