enoa T5 - Brushing Modes

6
T5 offers different brushing modes and intensity for various
oral care needs:
• Clean - Brush Head in high frequency, remove bacteria
on teeth.
• Sensitive - For sensitive teeth and gums, brushing your
teeth in gentle frequency.
• Massage - Brush teeth in extremely gentle frequency.
•• W hite - Clean and Polish mode switching continuously
and whitening teeth.
• Polish - High strength and high frequency, polishing and
brightening teeth.
BRUSHING MODES
• Press On/Off Button for 5s to power on the product and
start the operating sequence. Press On/Off shortly to
switch between the Brushing Modes in sequence (clean
mode, sensitive mode, massage mode, white mode,
polish mode, power off). Press On/Off Button for 5s to
switch off the product.
• • Each mode can be adjusted to three different intensity
levels (Low, Mid, High) by pressing the Brushing Intensity
Button in sequence.
• The product automatically starts in the clean mode
when pressing On/Off Button once. To shift to another
mode, press On/Off - Brushing Mode button a second
time.
•• When a Brushing Mode is selected, the corresponding
indicator will light on.
• 1 minute in Polish Mode, 2 minutes in Clean, Sensitive,
Massage and White Modes and 30s interval time are
recommended.
• After brushing, rinse your Brush Head thoroughly under
running water.
• Remove the Brush Head from the handle and clean both
parts separately under running water. Then wipe them
dry before putting the handle onto the charging unit.
•• Before cleaning your charging unit, make sure to unplug
the adaptor. Only use a dry or damp-dry cloth to wipe
the surface of the charging unit.
• Place the charging unit onto a dry and safe place.
• Do not plug in the charging unit until it is completely dry
•• Important: do not clean the charging unit under
running water or immerse it into water. Place the charge
station on a dry and safe place.
CLEANING RECOMMENDATIONS