EasyManua.ls Logo

enphase 5P - Safety Information

enphase 5P
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Enphase Energy System with IQ Battery 5P Owner’s Guide
Safety information
Safety and advisory symbols
Important safety instructions
This manual describes the safe use of the Enphase Energy
System with the IQ Battery 5P units for a homeowner.
See the Safety Datasheet for safe handling.
Safety instructions
To reduce the risk of electric shock and to ensure the
safe installation and operation of the Enphase Energy
System, the following safety symbols indicate dangerous
conditions and important safety instructions.
This indicates a hazardous situation, which, if not
avoided, will result in death or serious injury. Use
extreme caution and follow instructions carefully.
WARNING!
NOTE
DANGER!
This indicates a situation where failure to follow
instructions may be a safety hazard or cause
equipment malfunction. Use extreme caution and
follow instructions carefully.
In case of re, use a standard or carbon dioxide
re extinguisher or another appropriate
extinguisher to put out the re.
If the Enphase Storage equipment generates
smoke, remove AC power from the Enphase
Energy System, and turn the DC switch on the IQ
Battery 5P units to the OFF position, following
the instructions in the manual.
Do not dispose of the IQ Battery 5P units in a re
or by burning.
Do not allow or place ammable, sparking,
or explosive items near the Enphase Storage
system equipment.
A battery can present a risk of electrical shock,
re, or explosion from vented gases. Only
qualied electricians should install, troubleshoot,
or replace the Enphase Energy System
equipment or wiring.
During use, when stored, or during transport,
keep the IQ Battery 5P unit in an area that is well
ventilated, where the ambient temperature is
between -15ºC to 55ºC (5ºF to 131ºF).
Risk of electric shock. In areas where ooding
is possible, install the Enphase Energy System
equipment at a height that prevents water
ingress.
This indicates information important for optimal
system operation. Follow instructions carefully.
The IQ Battery 5P unit is designed for stationary
installation only. It is not designed for mobile
applications such as installation on vehicles
and trailers and should not be used in such
applications.
Do not attempt to repair the Enphase Energy
System equipment; it contains no user-
serviceable parts. Do not open the IQ Battery
5P unit under the cover. Doing so will void
the warranty. If the Enphase Energy System
equipment fails, contact your solar installation
professional or Enphase at https://enphase.com/
en-gb/contact.

Related product manuals