enphase Gateway User Manual

support@enphaseenergy.com
1 877 797 4743
ENPHASE QUICKSTART GUIDE
1
REGISTER
Installers: Begin the activation process
• First-time installers: Go to enlighten.enphaseenergy.com/register and complete
the form. Your login credentials will be emailed to you.
• Self-installers: Click on the “Self-installed” checkbox.
• Existing installers: Log into Enlighten, click “Add New Activation” in the Installation
Status widget.
2
INSTALL
Install the PV modules and microinverters
Consult the microinverter installation manual for installation and commissioning
instructions.
3
CONNECT
Install the Envoy Communications Gateway
• Connect to a broadband router and plug into a dedicated wall outlet.
• Wait 15 minutes to allow the Envoy to start detecting the microinverters in your array.
• Ensure at least 2 level bars and the correct number of microinverters are showing
(see overleaf for troubleshooting).
LEVEL
05:00 +WEB
Devices: 15
Consult the Envoy installation manual for more details.
4
ASSIGN
Use the Array Builder to generate the array
• Once all microinverters have been detected, log in to Enlighten to
use the Enlighten Array Builder.
• For guidance on how to use the Array Builder, please visit
www.enphase.com/support/learningcenter.cfm
4 Easy Steps
Solar PV power systems should be
installed by qualied personnel.
980000000366- 980000000364-
980000000364- 980000000362- 980000000367-
BROADBAND ROUTER
LAN CABLE
1 2 3
1 2 3

enphase Gateway Specifications

General

Communication	Wi-Fi, Ethernet, Cellular (optional)
Monitoring	Enphase Enlighten monitoring platform
Product	Enphase Gateway
Power Supply	100-240V AC, 50/60Hz
Compatibility	Enphase Microinverters

Summary

Enphase Quickstart Guide - 4 Easy Steps

System Registration

Guide for installers and self-installers to begin the activation process in Enlighten.

PV Module and Microinverter Installation

Instructions for installing and commissioning PV modules and microinverters.

Envoy Gateway Connectivity

Connect the Envoy Gateway to a broadband router and wall outlet for system detection.

Array Builder Usage

Utilize the Array Builder in Enlighten to generate the system's array configuration.

Troubleshooting Envoy Connectivity and Performance

Internet Connection Issues

Resolving '-Web' status by obtaining a new IP address for internet connection.

Signal Strength and Device Count

Troubleshooting low signal bars or incorrect device counts with Envoy placement.