Section 8 — Understanding Presets
14 ENSONIQ KT Musician’s Manual
• If System•MIDI page 4 Base Channel Status = MIDI or *EXT*, the Default Preset will have
only Track 5 selected.
• Tracks 3 and 7 will both have their Key Range default to KeyRange = A0-B3. This provides
instant access to keyboard splits on the lower half of the keyboard, both locally and via MIDI.
• Tracks 4 and 8 will both have their Key Range default to KeyRange = C4-C8. This provides
instant access to keyboard splits on the upper half of the keyboard, both locally and via MIDI.
• The name of the new preset will default to “Seq/Preset-##” with the ## field defaulting to
the memory location number to which the Preset is automatically saved. This name can be
changed at any time with the “Rename SEQ/Pset” command ({EDIT_SEQ/PRESET}, upper
{4}, then the lower {4} button). For more information about these parameters, see Section 9
— Preset/Track Parameters.
When a Default Preset template is created, it has no time signature. Pressing the {RECORD}
button with a Default Preset template selected will bring up the Time Signature selection page,
prompting you to select a Time Signature, just as if you were creating a new sequence in an
*EMPTY SEQ/PSET* location. Use the Data Entry Controls to set the time signature. When you
press the {ENTER} button, the click (metronome) will start, and you can begin recording. After
pressing the {STOP"CONTINUE} button from Record, you will be prompted to “Keep first ###
bars?” as per normal sequencer operation. From this point onward, the Default Preset template
will behave just like any other sequence.
To Next Page
Loading...
Need help?
General
