KT Quick-Start Guide
13
• Press the {]} button repeatedly until a capital “S” is displayed.
• Continue pressing the {>} button to underline each space in turn, and then use the {[} and
{]} buttons—or the Data Entry Slider—until you’ve spelled out “Synth Breath.” Don’t forget
to leave a space between the two words! You’ll also want to add a space on the end to get rid
of the “d” from “Tutorial Sound.”
When you’re done, the screen will look like this:
Save SOUND
Synth Breath_
• Press the {SAVE} button again. The display will change to:
SaveTo i:INT 79
Synth Breath_
• Press the {SAVE} button again. The screen briefly says:
Saved.
We’ve just edited and saved our first sound. From now on, whenever you go to Internal location
i:INT 79, Synth Breath will be there, just as we saved it.
To Next Page
Loading...
