KT Quick-Start Guide
19
Sequencing
What is a Sequence?
A sequence is simply a piece of music recorded by the KT. Each sequence can contain up to eight
independent performances—using eight different sounds—playing together to produce a
complete musical arrangement. Each one of these performances is called a “track.” To learn all
about sequences and sequencing, see your Musician’s Manual, Section 10—Understanding the
Sequencer.
Selecting and Playing a Sequence
We select sequences in exactly the same way that we select presets—in fact, they exist side-by-
side in the same areas of the KT’s memory. When you’re in Select Seq/Preset mode—as we are
now—use the upper and lower number buttons to select sequences within a bank, and use the
{BANK} button to switch between banks.
• Press the {BANK} button and the lower {0} button. On the display you’ll see:
flashing
m
iSEQ 00 Tempo120 TutorialSequence
• Press the {PLAY} button.
• “TutorialSequence” will start to play. When you’d like it to stop playing, press
{STOP"CONTINUE}.
Creating Your Own Sequence
• Press the lower {2} to select the next empty Seq/Preset location. The KT will prompt you to:
Press ENTER to Make new Pset=02
• Press the {ENTER} button. The display will show:
New Sequence Location = 02
i
flashing
To Next Page
Loading...
Need help?
General
