KT Quick-Start Guide
20
The KT is asking you to verify the location of the new sequence.
• Press the {YES} button. Shown next will be:
Time Signature = 04/4
i
flashing
The KT is asking what the new sequence’s time signature should be. We’ll leave it as it is.
• Press the {YES} button twice. This brings us to the screen where we can name our new
sequence:
New name = Seq/Preset-02
Let’s call our new sequence “I Made This One!”
Naming a sequence is the same as renaming a preset and naming a sound.
• Use the {>} button to underline each space in turn, and then use the {[} and {]} buttons or
the Data Entry Slider until you’ve spelled out “I Made This One!”
When you’re done, the display will look like this:
New name = I Made This One!
• Press the {ENTER} button one more time. The display will briefly show:
Command
Successful!
To Next Page
Loading...
Need help?
General
