KT Quick-Start Guide
15
• Press the {EDIT_TRACK} button.
Edit
Track
• Hold down the lower {2} button (Beneath the display) for a few seconds. The display shows:
iPSET01 Trk2 - KeyRange=A0 C8
i
flashing
On the bottom line of the display, “A0” is slowly flashing.
• Play a Middle C on the keyboard. The “A0” changes to a “C4,” which is Middle C.
• Now “C8” is flashing.
On the KT-76, play the highest note on the keyboard—the “C8” changes to “G7,” the note
you just played.
On the KT-88, play the highest note on the keyboard—“C8” stops flashing and remains
solidly lit (C8 is the note you just played).
• Play up the keyboard from the bottom.
Synth Breath is now playing only in the key range we’ve just selected.
• Press the {SELECT_SEQ/PRESET} button.
Select
Seq/Preset
The display shows:
iPSET01 Seq/Preset-01
This tells us which Seq/Preset memory location we’ve been working in. We’ll talk about what
“Seq” means later.
• Double-click on {SEQUENCER/PRESET_TRACK} button {3}.
• Play up and down the keyboard.
You’ll now find that from the bottom of the keyboard to the B just below Middle C, Voice Bell
plays, and that from there on up, it’s Synth Breath! We’ve just created a “split.”
To Next Page
Loading...
