KT Quick-Start Guide
17
When you’re done, the screen will look like this:
New name = 2 Sounds at Once
• Press the {ENTER} button. The display briefly shows:
Command
Successful!
Then the KT will return to the first screen we encountered when we began renaming our preset.
Saving Your Preset
Let’s save the changes we’ve made to our preset.
• Press the {SELECT_SEQ/PRESET} button. This puts the KT into Select Seq/Preset mode.
• Press the lower {1} button. The display asks:
Save changes? 2 Sounds at Once
• Press the {YES} button. It’s the same button we used earlier as {SAVE} and {ENTER}.
If you’ve made changes to a preset, and then select another one, the KT will ask you if you want
to save your work. You can also save changes by reselecting the preset you’re working on, which
is what we just did.
To Next Page
Loading...
