KT Quick-Start Guide
27
• Press the {[} button until the display reads:
Rep 1 Step 1 TutorialSequence
i
flashing
We’ve just selected TutorialSequence as our first song step.
Let’s use our sequence as the second song step.
• Press the {<} button so that the step number is flashing again.
• Press the {[} button. Now we’re at Step 2.
• Press the {>} button. Once again, the bottom line of the screen is flashing.
• Press the {[} button until the screen says:
Rep 1 Step 2 I Made This One!
i
flashing
• Press {SELECT_SEQ/PRESET} and press {PLAY} to listen to “My Tutorial Song.”
It starts with “TutorialSequence” and then goes right into “I Made This One!” We currently have
the KT set up so that when the song ends, it will loop right back around to the beginning and
keep on playing.
• When you’re ready to stop listening to “My Tutorial Song,” press {STOP"CONTINUE}.
Enjoy!
Congratulations! You’ve just completed the KT Quick-Start Guide.
You’ve taken the KT through all of its major operations and even made some music in the
process. Starting off with simply listening to sounds, you’ve worked your way all the way up
through creating your own song!
Don’t forget to check out the KT Musician’s Manual. The KT holds many more surprises, and the
Manual is the key to unlocking them. The fun has just begun!
Once again, thank you for purchasing the ENSONIQ KT.