ENSONIQ ZR-76 - Page 48

To Next Page

To Previous Page

Chapter 3ÑGlobal Settings

ENSONIQ ZR-76 Musician's Manual 39

4. Turn the Parameter knob until the display shows:

System Preferences

Track ParamReset= On

The current Track ParamReset value

The Track ParamReset parameter may be set to:

¥ OnÑ16 Track Recorder track parameters will be reset when a new sound is selected for a track

or when Reset All Controllers MIDI messages are received.

¥ OffÑ16 Track Recorder track parameters will not be reset when a new sound is selected for a

track, or when Reset All Controllers MIDI messages are received.

5. Use the Value knob to set Track ParamReset to the desired setting.

When you change any system setting, ZR-76 operations will pause momentarily

to store your settings into FLASH memory.

1. Press the System button.

2. Turn the Parameter knob until the display shows:

System/MIDI:

Set system prefs?

3. Press Yes if youÕd like to change the current system preferences. Press No if youÕd like to cancel the

procedure.

4. Turn the Parameter knob until the display shows:

System Preferences

Track ParamReset= On

The current Track ParamReset value

The Track ParamReset parameter may be set to:

¥ OnÑtrack parameters will be reset when a new sound is selected for a track or when Reset All

Controllers MIDI messages are received.

¥ OffÑtrack parameters will not be reset when a new sound is selected for a track, or when Reset

All Controllers MIDI messages are received.

5. Use the Value knob to set Track ParamReset to the desired setting.

ÕÕ

When caught in a burst of creativity, itÕs all too easy to inadvertently erase things youÕd rather preserve.

The ZR-76 offers a special screen prompt as a reality check during activities that could result in the loss

of sounds, rhythms or presets you donÕt really want to lose. When saving sounds, rhythms or presets,

Other manuals for ENSONIQ ZR-76