ENSONIQ ZR-76 - Page 49

To Next Page

To Previous Page

Chapter 3ÑGlobal Settings

ENSONIQ ZR-76 Musician's Manual40

the ZR can be set to display:

INT memory is write

protected! Override?

When you encounter this message, you can press Yes to continue what you were doing, or press No to

abort the procedure. The Write Protect system parameter allows you to enable this parameter if you feel

youÕd benefit from this double-check, or to disable it if youÕd find the prompt unnecessary:

When you change any system setting, ZR-76 operations will pause momentarily

to store your settings into FLASH memory.

1. Press the System button.

2. Turn the Parameter knob until the display shows:

System/MIDI:

Set system prefs?

3. Press Yes if youÕd like to change the current system preferences. Press No if youÕd like to cancel the

procedure.

4. Use the Parameter knob to scroll until the display shows:

System Preferences:

Write Protect=Prompt

The current Write Protect value

¥ OffÑthe ZR-76 will save a sound, rhythm or preset to the RAM or FLASH bank without

displaying the write-protect prompt.

¥ PromptÑthe ZR-76 will display the write-protect prompt before it saves a sound, rhythm or

preset to the RAM or FLASH bank.

5. Use the Value knob to set Write Protect to the desired value.

Many recording engineers have fond (and some not-so-fond) memories of the classic reel-to-reel

recording tape recorders. One such memory was the sound produced when the tape was rewound. The

ZR-76 offers this novelty sound as an option when you press the 16 Track Recorder Rewind button.

When you change any system setting, ZR-76 operations will pause momentarily

to store your settings into FLASH memory.

Other manuals for ENSONIQ ZR-76