Need help?Do you have a question about the Entryvue VD-950 and is the answer not in the manual?
General| Brand | Entryvue |
|---|---|
| Model | VD-950 |
| Category | Intercom System |
| Language | English |
Details wire types (14 gauge, CAT5) and preparation for reliable connections.
Describes controlling door strikes/magnetic locks via dry contact or internal power.
Explains setting up door locks using internal power for single-door/monitor systems.
Guide to setting the unlock duration on the monitor via installer menu codes.
Instructions for setting up direct calling between monitors (standard or group).
How to configure multiple monitors to display video when the doorbell rings.
Details maximum cable lengths for different wire types between door stations and monitors.
Explains dip switch configurations for various door station models.
Details dip switch configurations for multiple monitors and daisy-chain/parallel connections.
Covers various settings like master code, unlock time, and user group codes.
Step-by-step guide to reset settings and change the master code.
Instructions for setting lighting time, unlock duration, and keypad tone.
Guides on adjusting interference resistance and call tone settings.
Procedures for setting temporary access codes and user group codes.
Introduction to master cards, adding, and deleting user cards for Door Stations G/H.
Step-by-step process for registering and removing user ID cards for locks.
How to unlock doors using registered user ID cards for single or dual lock systems.
To Next Page