Need help?Do you have a question about the Environnement Envea MIR 9000 and is the answer not in the manual?
General| Technology | Non-Dispersive Infrared (NDIR) |
|---|---|
| Enclosure Rating | IP54 |
| Measured Gases | CO, CO2, NO, NO2, N2O, SO2, CH4 |
| Compliance | EN 15267, EN 14181, US EPA |
| Application | Emissions monitoring |
| Measurement Range | Configurable depending on gas and application |
| Response Time | < 60 seconds (T90) |
| Outputs | 4-20 mA, Ethernet, Modbus |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 5-40 °C |
Covers the general overview, presentation, description, operation modes, and related equipment of the MIR 9000.
Details technical, storage, and installation characteristics, including dimensions and weight.
Explains the scientific principle of infrared absorption and correlation for gas analysis.
Explains how to navigate menus, use keys, and program operating parameters on the MIR 9000.
Provides instructions for performing zero and span calibration procedures to ensure measurement accuracy.
Outlines critical safety precautions that personnel must observe during analyzer maintenance operations.
Details common system alarms and control messages, their causes, and recommended troubleshooting actions.
Covers procedures for adjusting power supplies, converters, and inspecting motherboard components.
To Next Page
