Duplication prohibited MP101M Environnement S.A
0–3
SEPTEMBER 2013
SUMMARY
CHAPTER 0 SAFETY GUIDELINES
0.1
WARNING 0–9
0.2 REMINDER OF PRINCIPAL STATUTORY TECHNICAL PRECAUTIONS 0–10
0.3 PRESENTATION OF EQUIPMENT 0–11
0.4 RISKS ASSESSMENTS 0–13
0.5 RISK ANALYSES 0–14
0.6 RADIATION PROTECTION RECOMMENDATIONS 0–15
0.7 SAFETY INSTRUCTIONS - EXAMPLE 0–16
0.8 TECHNICAL CONTROLS OF RADIOPROTECTION 0–17
0.9 END OF LIFE OF THE ANALYZER 0–17
CHAPTER 1 GENERAL – CHARACTERISTICS
1.1. GENERAL 1–3
1.2. CHARACTERISCS 1–13
CHAPTER 2 PRINCIPLE OF OPERATION
2.1. BETA GAUGE PRINCIPLE (FIGURE 2–1 AND FIGURE 2–2) 2–3
2.2. FLOW REGULATION PRINCIPLE 2–6
2.3. ACQUISITION AND PROCESSING OF MEASUREMENT PARAMETERS 2–8
2.4. ORGANIZATION OF MEASUREMENTS 2–8
2.5. REGULATED SAMPLING TUBE (RST) 2–11
CHAPTER 3 OPERATION
3.1 INITIAL START-UP 3–4
3.2 PROGRAMMING THE MP101M 3–7
3.3 DESCRIPTION OF THE DIFFERENT SCREENS 3–10
CHAPTER 4 PREVENTIVE MAINTENANCE
4.1. SAFETY INSTRUCTIONS 4–2
4.2. MAINTENANCE CALENDAR 4–3
4.3. MAINTENANCE OPERATION SHEETS 4–3
4.4. EQUIPMENT NECESSARY FOR MAINTENANCE 4–27
To Next Page
Loading...