energiSava
®
200
01423 810 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
About the energiSava
®
200
The energiSava
®
200 is an MVHR unit (Mechanical Ventilation with
Heat Recovery). It is ideal for small to medium sized properties with
a kitchen and up to 5 additional wet rooms. The unit is capable of
delivering a maximum airflow of 245m
3
/h (68l/s) and a maximum
system pressure in excess of 500Pa.
The unit will help to create a fresh and healthy living environment by
supplying filtered air into a property through supply valves. Moist, stale
air is removed out of the property through extract valves.
The heat exchanger inside the unit transfers waste heat energy from
the extracted air to the supplied air in order to improve the thermal
efficiency of the property and reduce heating costs.
When outdoor temperatures are low, the frost protection feature
automatically reduces the supply air flow rate to ensure the heat
exchanger inside the unit does not freeze.
The Intellitrac
®
humidity tracking function monitors the humidity levels
in the extracted air and will automatically increase the supply and
extract air flow rates when the humidity levels rise. Once the humidity
levels are lower the air flow rates will return to the normal rate.
The automatic, mechanical bypass helps to control temperature
entering the home on warmer days.
The energiSava
®
200 includes a switch live function. When wired
through the lighting switch of a room (such as a bathroom) the unit
will enter boost mode whenever the light is turned on.
5
To Next Page
Loading...
Need help?
General
