Envirovent energiSava 200 Installation Guide

energiSava
®
200
01423 810 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
Installation - Wall Unit
1. Hold the unit up to the chosen location and check there is space
for ducts, condensate drainage, filter and keypad access.
2. Once you are satisfied with the position, fix the wall bracket in place.
Use 5 8gx2.0” screws and 5 plasterboard plugs.
3. Now attach the two wall spacers to the back of the unit. This must
be done to ensure that any condensate drains out of the unit correctly.
Use 2 10gx0.5” screws.
4. Place the unit onto the wall bracket. Hold the end of the tie down
cable flush to the wall then screw it in place. This will ensure the unit
is not accidentally knocked out of position.
2
4
1
3
7

Envirovent energiSava 200 Specifications

General

Brand	Envirovent
Model	energiSava 200
Category	Heating System
Language	English