6. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
7.
Windows users:
Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1440 x 900 @ 60 Hz
Resolution
Right-click on the Windows desktop > Properties > Settings >
“Desktop Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for
instructions.
Example:
Power cable
3
D-Sub cable
Audio cable
5.
DVI cable
Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
To Next Page
Loading...
