Page 11 Envoy Connect User Guide
• Blinks slowly to indicate charging via USB cable
• The light will always flash if the Battery level is low
• Blinking during playback means the Sleep Timer is
on. It will also blink while rewinding or fast-
forwarding
- Micro SD Card: You can add to the 8GB internal
memory capacity by inserting a micro SD card (up to
128GB) into the slot on the bottom right. Ensure the
micro SD card is inserted correctly. The card is
inserted correctly when it is turned over so that the
ridge on the top face of the card is facing down. The
long straight edge of the card will be facing to the
right, and the ‘jagged’ edge facing to the left. Don’t
use excessive force, it will insert easily when it is the
right way around. Be careful when ejecting the card
as it may ‘spring out’ quickly and be lost.
- USB Computer Connection: Connect to a computer
by inserting the supplied micro USB plug into the
middle port on the bottom edge of the Player. Use
this connection for loading books and charging the
Player.
Note: To load books the Player must be turned off
before it is connected to your computer. You cannot
load and play books at the same time.
To Next Page
Loading...