EO Mini Pro 2 - Page 12

EO Mini Pro 2 Installation & User Guide
© EO Charging 2020
The following steps should
be taken by the installer and
customer in order to connect
the EO Mini Pro 2 to the EO
Cloud using the EO Smart
Home app.
The process for connecting
the EO Mini Pro 2 can be
summarised into the following
steps:
01
Installer
Download the EO Smart Home app onto a smart phone and create an account.
02
Installer
Using the app, connect to the Wi-Fi hotspot created by the EO Mini Pro 2 and enter site details such as Solar, ALM and site capacity.
03
Installer
Check that the EO Mini Pro 2 is operational by running the installation test on the app.
04
Homeowner
Download the “EO Smart Home” app onto a smart phone and create an account.
05
Homeowner
Using the app enter user details such as vehicle, location.
06
Homeowner
Join the EO Mini Pro 2 to the local Wi-Fi.
07
Homeowner
Start charging!
At this point it is possible to view the status of the EO Mini Pro 2 using the app.
NOTE:
The EO Mini Pro 2 only works with 2.4GHz Wi-Fi networks.
11