Need help?Do you have a question about the EO Mini Pro 2 and is the answer not in the manual?
General| Power plug | - |
|---|---|
| Product color | Black |
| Output current | 32 A |
| AC input voltage | 230 V |
| Built-in display | No |
| Charging voltage | - V |
| AC input frequency | 50 Hz |
| International Protection (IP) code | IP54 |
Weight and Dimensions| Width | 125 mm |
|---|---|
| Height | 175 mm |
| Weight | 1300 g |
Detailed steps for physically mounting and wiring the EO Mini Pro 2 unit.
Steps for downloading and creating an account on the EO Smart Home app.
Installer checks wiring correctness and CT clamps using the EO Smart Home app.
Steps for homeowner to configure Wi-Fi and site details for the EO Mini Pro 2.
Information on Earthing, RCD configuration, PEN conductor, and supply ratings.
Details for connecting the EO Mini Pro 2 in Single Phase TN networks.
Details for connecting the EO Mini Pro 2 in Single Phase IT networks.
Instructions on how to adjust the maximum current rating using the rotary switch.
Steps for initiating, charging, and stopping a vehicle charging session.
Guidance on properly winding and storing the tethered charging cable.
Recommendations for periodic cleaning of the charging socket terminals.
Observed LED sequences during the unit's power-up process.
Interpreting LED colours and states during normal operation.
Understanding LED fault codes and their meanings.
Troubleshooting steps for Wi-Fi connectivity problems.
Solutions for frequent Wi-Fi disconnections.
Diagnosing why a vehicle did not charge as scheduled.
Guidance on handling error codes reported by the application.
Details on how to reach EO support and access technical documentation.
To Next Page
